Latest News

Conversion to surface-mounted-hinges

The following key dates apply: - Availability of the new hinges for vent weights of 60 kg, 90/130 kg and 200 kg in November 2015 - Changeover and discontinuation of the 60 kg versions by November 2015 - Changeover and discontinuation of 90/130 kg and 200 kg in 2nd quarter of 2016 Important technical information [...]

March 21st, 2017|

Changes to T-cleats for Schueco window systems AWS

We would like to take this opportunity to inform you of the upcoming changes with regard to T-cleats for AWS 50 - AWS 75 Window Systems: Due to increasing strength requirements through the use of triple pane insulating glass and functional insulating glass as well as ever greater fittings loads, T-cleats will be fitted with [...]

March 21st, 2017|

Assortment expansion fixing lug 268 696

As of October 2015 we extended the product range of fixing lugs by an additional length. Based on the increasing requirements on energy efficiency associated with increased wall constructions, a 200 mm fixing lug will now be provided by Schueco. The article is available in stock. The new fixing lug 268 696 will be included [...]

March 21st, 2017|

Schueco VentoAir – Self-regulating mechanical fan for the window rebate – is now available for further AWS-series

From now on Schueco VentoAir can not only be used for the series AWS 75.SI+, AWS 75 BS.SI+ and AWS 75.BS.HI but also for the series AWS 65, AWS 65.BS, AWS 70.HI and AWS 70 BS.HI. The new gasket pieces for the mechanical fan are documented in the new Order and Fabrication Manual and can [...]

March 21st, 2017|

Increasing the ease of use of Schüco aluminum lift and slide systems ASS 50 and ASS 70.HI

The Schüco lift and slide systems ASS 50 and ASS 70.HI are optimal solutions for the implementation of extensive sliding elements. In addition to the familiar good running characteristics, the following products improve the vent operation even more. Handle damper - Soft movement damping of the operating handle Integrated into the lift and sliding fitting, [...]

March 21st, 2017|